DBGEN=0, STOPEN=0, WINEN=0, WDOGEN=0, BYTESEL=00, WAITEN=0, CLKSRC=0, TESTSEL=0, STNDBYEN=0, DISTESTWDOG=0, ALLOWUPDATE=0, IRQRSTEN=0
Watchdog Status and Control Register High
WDOGEN | no description available 0 (0): WDOG is disabled. 1 (1): WDOG is enabled. |
CLKSRC | no description available 0 (0): Dedicated clock source selected as WDOG clock (LPO Oscillator). 1 (1): WDOG clock sourced from alternate clock source. |
IRQRSTEN | no description available 0 (0): WDOG time-out generates reset only. 1 (1): WDOG time-out initially generates an interrupt. After WCT time, it generates a reset. |
WINEN | no description available 0 (0): Windowing mode is disabled. 1 (1): Windowing mode is enabled. |
ALLOWUPDATE | no description available 0 (0): No further updates allowed to WDOG write once registers. 1 (1): WDOG write once registers can be unlocked for updating. |
DBGEN | no description available 0 (0): WDOG is disabled in CPU Debug mode. 1 (1): WDOG is enabled in CPU Debug mode. |
STOPEN | no description available 0 (0): WDOG is disabled in CPU stop mode. 1 (1): WDOG is enabled in CPU stop mode. |
WAITEN | no description available 0 (0): WDOG is disabled in CPU wait mode. 1 (1): WDOG is enabled in CPU wait mode. |
STNDBYEN | no description available 0 (0): WDOG is disabled in system Standby mode. 1 (1): WDOG is enabled in system Standby mode. |
TESTWDOG | no description available |
TESTSEL | no description available 0 (0): Quick test. The timer runs in normal operation. You can load a small time-out value to do a quick test. 1 (1): Byte test. Puts the timer in the byte test mode where individual bytes of the timer are enabled for operation and are compared for time-out against the corresponding byte of the programmed time-out value. Select the byte through BYTESEL[1:0] for testing. |
BYTESEL | no description available 0 (00): Byte 0 selected 1 (01): Byte 1 selected 2 (10): Byte 2 selected 3 (11): Byte 3 selected |
DISTESTWDOG | no description available 0 (0): WDOG functional test mode is not disabled. 1 (1): WDOG functional test mode is disabled permanently until reset. |